EASYfelt Waving Wall
Acoustic wall decoration with a parametric design
New
At the moment, you cannot order this product through our webshop. Please contact us by requesting a quote or asking a question using the buttons below.
Unique parametric design
- Available in multiple colours
- Panel system with continuous pattern sequence
At the moment, you cannot order this product through our webshop. Please contact us by requesting a quote or asking a question using the buttons below.
Unique parametric design
- Available in multiple colours
- Panel system with continuous pattern sequence
The Waving Wall is a statement piece for your interior. This parametric wall panel features a flowing, organic pattern that visually emerges from the wall, creating a striking 3D effect. The variation in depth and shape creates a dynamic interplay of light and shadow, causing the wall to change depending on the viewing angle. The panel is made from Dutch acoustic PET felt. Its undulating structure disrupts and absorbs sound waves, helping to reduce reverberation and unwanted reflections.
Please note: the Waving Wall is available in 6 different panel variants, each with unique slats. Together, these panels form one continuous parametric pattern. If you order 6 panels, you will receive each variant once; from the 7th panel onward, the sequence starts again.
Would you like to extend a continuous pattern with panels from previous orders? Please contact us in advance. With separate orders, we cannot automatically determine which panel variants you have already received.
- Unique parametric design
- Available in multiple colours
- Panel system with a continuous pattern sequence
Material
Made from Dutch PET felt containing at least 60% recycled material.
Dimensions
The Waving Wall is constructed with a material thickness of 9 mm.
The rear panel measures 600 × 2400 mm. The slats are 2400 mm high and protrude, depending on the shape, up to a maximum of 150 mm.
Fire safety
The base material from which the felt panels are cut has been tested in accordance with EN-13501 and classified as fire rating B-s1, d0.
Assembly
Place the rear panel in the desired position and secure it with screws (not included). Make sure each panel is correctly oriented: the top is recognised by the longer slot, and the bottom by the shorter. All rear panels are identical and can be assembled in the same manner.
Next, press each of the slats into their designated notches one by one. Pay close attention to the order: the slats are numbered and are installed in that order, starting with slat 1. If the wall is longer than 3.60 metres, the numbering continues up to slat 120, and then you start again at slat 1.
Absorption values
Disclaimer
This page has been compiled with the greatest care. No rights can be derived from this text, and changes are subject to change without notice. Our products are made from recycled PET. Slight colour variations may occur between production batches. No rights can be derived from these variations either.
The Waving Wall consists of 6 different panel designs that together form one continuous pattern. When ordering, you will receive the panels in sequence, from panel 1 through panel 6, after which the sequence starts again. If you do not order all panels at once, there is a possibility that you may receive the same panels again. If you would like the pattern to continue across multiple orders, please contact us in advance.
Customers also bought
We are EASYfelt
Acoustic PET felt solutions for all purposes!
EASYfelt specialises in solutions made from PET felt. We offer a variety of decorative solutions including wall solutions, ceiling solutions, screens, dividers and stand-alone objects.
Contact us!
Our specialists are at your service
We are happy to help you with all your questions about our PET felt products, prices and transports.
Roy Spies
Sales & Business developer
Do you have a question or need advice?
Our specialists are happy to help you
Call us at +31 30 227 08 88
Available from 08:30 to 17:00